Motorola AT Commands G24-L Informacje Techniczne Strona 306

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 522
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 305
Modem Configuration and Profile
3-230 AT Commands Reference Manual January 31, 2007
S, Bit Map Registers
This command reads/writes values of the S-registers. The G24 supports this command for various
S values, according to official specifications (ITU-I, ETSI, or manufacturer specific).
Command Type Syntax Response/Action Remarks
Set
ATSn=<value OK
or:
+CME ERROR: <err>
The Set command is allowed for
read/write S-registers, and not allowed
for read-only S-registers.
Read
ATSn? <current value of
S-register n>
or:
+CME ERROR: <err>
Test The Test command for Sn is not
defined by ITU, and therefore is not
supported by the G24. The G24 returns
an error.
Przeglądanie stron 305
1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 521 522

Komentarze do niniejszej Instrukcji

Brak uwag