Motorola AT Commands G24-L Informacje Techniczne Strona 255

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 522
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 254
Chapter 3: AT Commands Reference
January 31, 2007 AT Commands Reference Manual 3-179
The following table shows the +MIOC parameters.
Table 3-121: +
MIOC Parameters
<Parameter> Description
<pin selection> Selected pins for the action invoked. This is a binary vector in which each bit points to
pin number. Vector size is 8.
0 Not selected
1 Selected pin (default)
<data vector> This is a binary vector in which each bit show the physical value of pin. Data vector
size is 8.
0 Physical low signal.
1 Physical high signal (default).
The default value:
On Power Up - as previously saved in FLEX bytes.
Before set command first used with <Data vector> and <Mode>=0, or after +MIOC
without <Data vector> and before +MIOC command used - 1.
Przeglądanie stron 254
1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 521 522

Komentarze do niniejszej Instrukcji

Brak uwag