Motorola MC65 Dokumentacja Pobierz pdf (Strona 21)

Getting Started 1 - 5

Figure 1-5

Inserting the Battery

Charging the Battery

Charging the Main Battery

Before using the MC65 for the first time, charge the main battery until the amber Charging/Battery Status LED

remains lit (see Table 1-1 on page 1-6 for charge status indications). To charge the MC65, use a cable or a

cradle with the appropriate power supply. For information about the accessories available for the MC65, see

Chapter 2, Accessories.

The MC65 is equipped with a memory backup battery which automatically charges from the fully-charged main

battery. When using the MC65 for the first time, the backup battery requires approximately 40 hours to fully

charge. This is also true any time the backup battery is discharged, which occurs when the main battery is

removed for several hours. The backup battery retains RAM data in memory for at least 15 minutes (at room

temperature) when the MC65’s main battery is removed. When the MC65 reaches a very low battery state, the

combination of main battery and backup battery retains RAM data in memory for at least 36 hours.

For cable and cradle setup and charging procedures refer to the MC65 Integrator Guide.

•

USB Charging Cable

•

Charge Only Cable

•

Single Slot USB Cradle

•

Four Slot Charge Only Cradle

•

Four Slot Ethernet Cradle.

To charge the main battery:

1. Connect the charging accessory to the appropriate power source.

Battery

Battery Release Latch

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page

6-2.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 129 130

Brak uwag

Motorola MC65 Dokumentacja Strona 21