Motorola Netopia Embedded Software Dokumentacja Pobierz pdf (Strona 288)

Administrator’s Handbook

288

set security ipsec tunnels name "123" dest-int-network

ip-address

Speciﬁes the IP address of the destination computer or internal network.

set security ipsec tunnels name "123" dest-int-netmask

netmask

Speciﬁes the subnet mask of the destination computer or internal network. The subnet mask speciﬁes

which bits of the 32-bit IP address represents network information. The default subnet mask for most net-

works is 255.255.255.0 (class C subnet mask).

set security ipsec tunnels name "123" encrypt-protocol

(ESP) { ESP | none }

See page 146 for details about SafeHarbour IPsec tunnel capability.

set security ipsec tunnels name "123" auth-protocol

(ESP) {AH | ESP | none}

See page 146 for details about SafeHarbour IPsec tunnel capability.

set security ipsec tunnels name "123" IKE-mode

pre-shared-key-type (hex) {ascii | hex}

See page 146 for details about SafeHarbour IPsec tunnel capability.

set security ipsec tunnels name "123" IKE-mode

pre-shared-key ("") {hex string}

See page 146 for details about SafeHarbour IPsec tunnel capability.

Example: 0x1234

set security ipsec tunnels name "123" IKE-mode

neg-method {main | aggressive}

See page 146 for details about SafeHarbour IPsec tunnel capability.

Note: Aggressive Mode is a little faster, but it does not provide identity protection for negotiations nodes.

set security ipsec tunnels name "123" IKE-mode

DH-group (1) { 1 | 2 | 5}

See page 146 for details about SafeHarbour IPsec tunnel capability.

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 367 368

Komentarze do niniejszej Instrukcji

Brak uwag