Motorola SB3100 Instrukcja Instalacji Strona 9

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 57
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 8
The SB3100 cable modem delivers digital multimedia content in a two-way transmission
system. It provides access to a data network running over the cable system, which provides
access to the worldwide web.
The SB3100 is authorized by the Cable Modem Terminations System (CMTS) for use on the
network and automatically configures itself with the parameters received from the CMTS or
headend. When the SB3100 is powered on, it scans the frequency spectrum to locate the data
frequency and then automatically locks on to that channel. After finding the data channel, it
searches for a message containing the upstream parameters such as frequency, modulation,
symbol rate and forward error correction (FEC) format. The SB3100 then transmits a message
to the CMTS requesting additional information that enables network connection. Through a
series of messages, the SB3100 establishes Internet Protocol (IP) connectivity using Dynamic
Host Configuration Protocol (DHCP) and then receives a configuration file using the Trivial File
Transfer Protocol (TFTP). This configuration file contains additional parameters that are
required by the SB3100. When the configuration is complete, the SB3100 registers with the
CMTS and is authorized to use the network.
Figure 2-1 illustrates SB3100 data path:
10Base-T
Internet
IF
RF
RF
RF
HFC plant
Upconverter
Client PC
SB3100
external
cable
modem
Diplex
filter
CMTS
Network
management
services
Customer premises
equipment
10Base-T
The SB3100 supports 64 and 256 QAM technology that are necessary for the DOCSIS data
network. This network carries IP data in standard MPEG-2 packets. The RF downstream
receives data at speeds up to 38 Mbps and RF upstream provides data transfer at rates up to
10 Mbps.
The SB3100 provides an HTML user interface that enables you to monitor both the cable
modem and the data signals. This interface can be used to diagnose the network connections.
Przeglądanie stron 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 56 57

Komentarze do niniejszej Instrukcji

Brak uwag