
5 - 8 MC21XX Series Integrator Guide
Four-slot Charge Only Cradle
Four-slot Spare Battery Charger
During data
communication, no
data was
transmitted, or
transmitted data was
incomplete.
MC21XX removed from cradle
during communication.
Replace MC21XX in cradle and retransmit.
Incorrect cable configuration. See
Chapter 2, Accessories
for cable configurations.
Communication software is
not installed or configured
properly.
Perform communication setup as described in
Chapter
3, Synchronization
.
Table 5-2
Troubleshooting the Single-slot USB Cradle (Continued)
Problem Cause Solution
Table 5-3
Troubleshooting the Four-slot Charge Only Cradle
Problem Cause Solution
MC21XX LED Indicator
does not light when
MC21XX inserted.
Cradle is not receiving power. Ensure the power cable is connected securely
to both the cradle and to AC power.
MC21XX is not correctly
seated.
Remove and re-insert the MC21XX into the
cradle, ensuring it is correctly seated.
MC21XX battery is not
charging.
MC21XX was removed from
cradle or cradle was
unplugged from AC power too
soon.
Ensure cradle is receiving power. Ensure
MC21XX is seated correctly. If the MC21XX
battery is fully depleted, it can take up to four
hours to fully recharge a battery.
Battery is faulty. Verify that other batteries charge properly. If so,
replace the faulty battery.
The MC21XX is not fully
seated in the cradle.
Remove and re-insert the MC21XX into the
cradle, ensuring it is correctly seated.
Table 5-4
Troubleshooting the Four-slot Spare Battery Charger
Problem Cause Solution
Spare Battery
Charging LED does
not light when spare
battery is inserted.
Spare battery is not
correctly seated.
Remove and re-insert the spare battery into the charging slot,
ensuring it is correctly seated.
Komentarze do niniejszej Instrukcji