
Maintenance
&
Troubleshooting
126
Single Slot USB/Serial Cradle
Table 9-3 Troubleshooting the Single Slot USB/Serial Cradle
Symptom
Poss
i
ble
Cause
Action
Cradle is not
receiving power.
Ensure the power cable is connected securely to both the
cradle and to AC power.
FR68 Series is not
seated firmly in the
cradle.
Remove and re-insert the FR68 Series into the cradle,
ensuring it is firmly seated.
LEDs do not
light when FR68
Series or spare
battery is
inserted.
Spare battery is not
seated firmly in the
cradle.
Remove and re-insert the spare battery into the charging
slot, ensuring it is firmly seated.
FR68 Series is
removed from
cradle or cradle
is unplugged from
AC power too soon.
Ensure cradle is receiving power. Ensure FR68 Series is
seated correctly. Confirm main battery is charging under
Start>
Settings>System>Power. The 3600 mAh battery is fully charged
in approximately six hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the
faulty battery.
The FR68 Series
is not fully seated
in the cradle.
Remove and re-insert the FR68 Series into the cradle,
ensuring it is firmly seated.
Ambient
temperature of the
cradle is too warm.
Move the cradle to an area where the ambient
temperature is between 0 °C ( 32°F) and 35°C (95°F).
FR68 Series
battery is not
charging.
Extreme battery
temperature.
Battery does not charge if ambient temperature is below 0°C
(32°F) or above 45°C (113°F).
Komentarze do niniejszej Instrukcji